Intelligent Shop Floor Software for Apparel Manufacturers

Click here for software download & more information!

What is CELLS WORKFLOW — FASHION TRAC™?

CELLS WORKFLOW — FASHION TRAC™ is a straight forward, simple to setup, yet powerful product and job tracking software for fast New Product Introduction (NPI). The FASHION TRAC software provides total traceability in manufacturing floor operations for compliance, customer requirements and regulatory standards. Compliance to both internal or external standards is a key factor in a manufacturers growth. FASHION TRAC product tracking software collects real-time data for all your product builds. At each step of the manufacturing process FASHION TRAC makes the process more efficient and effective through the discipline it enforces. The system forces the workers to do things the right way. The end results are fewer errors and higher yields. Deliver assembly instructions and collect quality data from your assembly process while enforced routing ensuring quality processes are implemented. Know the WIP status of every unit in any work order and have all build history data available. CELLS WORKFLOW has been used by our customers for over 35 years.


Click here for software download & more information!


mes tracking software

Above the operator Logs In to start the process:
The next few pictures that follow show features of CELLS and these example pictures used are for electronics manufacturing. However process is process and CELLS can be used in virtually any industry such as apparel, textiles, medical, chemicals, aerospace, pharmaceuticals, foods, etc.

product job tracking software

The operator opens the work to be performed: Work can be open by bar code serial number, work order, operation, defect, etc.

product job tracking software inspect assembly

The operator inspects, assembles, etc. as directed for that step in the process.

product job tracking software inspect assembly linked documents

The operator has linked documents of virtually any type at their finger tips for each step in the process routing.

product job tracking mes software inspect assembly log data

The operator can log fault data, date codes, etc.

product job tracking mes software inspect assembly log data panelized

The operator can breakout and track panelized units if needed.

product job tracking mes software inspect assembly log data sub-assembly

The operator can add sub-assemblies for box build or remove sub-assemblies for disassembly as allowed for that process step.

product job tracking mes software inspect assembly log data reports wip

REPORTS: The operator as allowed and management can check status of a unit, work order or all Work In Process (WIP) on the production floor. Review history of shipped product and RMA. Details by serial number, operator, operation, time/date, etc.

VIDEO: Click the video above for a product review.


$START pass go to PROCESS ORDER
PROCESS ORDER pass go to CUTTING or MRB
CUTTING pass go to SEW or MRB
SEW pass go to HOLDING TANK or MRB
HOLDING TANK pass go to SEWING IN APPLIQUE or MRB
SEWING IN APPLIQUE pass go to SEWING IN EMBROIDRY or MRB
SEWING IN EMBROIDRY pass go to PRINTING or MRB
PRINTING pass go to INSPECTION or MRB
INSPECTION pass go to SHIPPING or MRB
SHIPPING pass go to STOCK/SHIPPED or MRB
STOCK/SHIPPED if RMA go to PROCESS ORDER


Click here for software download & more information!

Need to track every job in your factory?

Need instant status of every work and sales order on your production floor?

Within an hour you will be tracking your first product.

manufacturing execution system mes shop floor control wip erp plm software product tracking

Other Industries Cells Workflow Is Used In


CELLS Workflow MES Product Tracking —
FACTORY FLOOR CONTROL SYSTEM


manufacturing execution system mes software wip erp plm product tracking


Unisoft CELLS WORKFLOW FASHION TRAC™ software provides a complete Production Floor Product Tracking System that you can test drive today. CELLS WORKFLOW FASHION TRAC embodies a straight forward methodology for tracking product and reporting progress.

Unisoft Founded in 1985 offers powerful, full featured Manufacturing Execution System (MES) called "CELLS WORKFLOW FASHION TRAC Product Tracking MES". CELLS WORKFLOW FASHION TRAC provides Plant Intelligence, lean manufacturing and integrates shop floor processes and critical data with ERP and management information systems. The CELLS Workflow MES provides total traceability in manufacturing floor operations for compliance, customer requirements and regulatory standards. Compliance to both internal or external standards is a key factor in a manufacturers growth. CELLS WORKFLOW has been in use on our customers production floors for over 35 years. Small to large manufacturers now have the Factory Intelligence to increase overall efficiency in all critical areas of production with CELLS WORKFLOW. CELLS WORKFLOW is a surprisingly easy to use solution for tracking product, order status, collecting data, delivering documents and more. CELLS WORKFLOW is easy to implement, go-live in week one. Call us (enable JavaScript for our phone number) for more information.




SOFTWARE DOWNLOAD

manufacturing execution system mes wip erp plm software product tracking

The Unisoft software has been developed over the last 35 years.
Join the over 4000 customers
worldwide that truly love its performance.
Please enter your email to receive your software and more information.

Email addresses are kept private.
Optionally to receive your software call us (enable JavaScript for our phone number).

Please enter your email to receive your software and more information.
Unisoft over 35 years and 4000 customers.

Email:  

Please double check that your email address is correct.
Email addresses are kept private.
The software download link, more information and periodic updates will be sent to this address.

Optionally to receive your software call us (enable JavaScript for our phone number).


Why Companies Choose Unisoft

manufacturing execution system mes software wip plm erp product tracking

manufacturing execution system mes spc wip production floor control plm erp software product tracking


FASHION TRAC lets you manage and deliver:

For markets such as clothing software, garment software, fashion software, clothing manufacturer, clothing business, clothing manufacturing, garment manufacturing, etc.



Customer Comments

"We purchased the CELLS WORKFLOW system in early 2005. It was up and running quickly. CELLS WORKFLOW tracks product at approximately 20 stations on our production floor. Some stations have only barcode readers and others have barcode and keyboard entry, CELLS WORKFLOW handles both equally. CELLS WORKFLOW tracks work orders that have individual serial numbers or that travel as non-serialized lots, you can even serialize in the middle of the routing. Attach finished sub-assemblies to the assembly in process and it's all tracked. CELLS WORKFLOW is a great value and we are extremely pleased with Unisoft's support and responsiveness to our needs."

Mike Bitner
ColoradoVNET


"Lecroy Corp. has been using Unisoft CELLS Workflow MES Product Tracking Manufacturing Execution System Software since 1996. In 1996 we purchased a 15 station license of CELLS Workflow MES and in 1997 we upgraded to a site license in this New York plant and also tied in all production in our sister plant in Geneva, Switzerland via Unisoft CELLS Workflow MES. CELLS WORKFLOW is now installed in over 200 locations on our factory floors. We went from 100% paper to 100% paperless with CELLS WORKFLOW and have tracked millions of transactions. Forced routing flow eliminates assembly errors and CELLS Workflow MES delivers the exact current document from a controlled source to each step in the assembly process. Our production equipment, burn-in chambers, Lab View/Lab Windows, etc. automatically log data to the CELLS Workflow MES software. Part bins are automatically restocked weekly via a CELLS Workflow MES report, daily quality reports are generated, etc. Production data collected in the CELLS WORKFLOW Manufacturing Execution System is used by our BAAN ERP system to pin point the exact status of all production."

Michael Forrestor
Lecroy Corporation
New York


A Unisoft client located in the United States has been using the CELLS Workflow MES Product Tracking Software since 1997. This large company makes class 1 medical products under FDA audit. The Unisoft CELLS Workflow MES software tracks their product lines throughout the production process and provides current production status to their Oracle ERP system (JD Edwards EnterpriseOne). A subsidiary of their's located in Canada is selecting a MES tracking software system for their facility and representatives from their plant visited the United States parent company in November of 2005 to look at the Unisoft CELLS Workflow MES Plant Execution System installed there.

Below is a summary of that visit. We are proud of their selection of the Unisoft CELLS Workflow MES Product Tracking Manufacturing Execution System software. If you wish further details on the company please contact Unisoft directly.

"Unisoft is presently the choice application for adding an FDA compliant electronic data collection and WIP tracking system here at this facility in Canada. I had the VP of operations and head of the IT department visit our parent company in the United States to get an extended presentation from the Unisoft CELLS Workflow MES Administrator there. The presentation went very well and they both agreed Unisoft would be the best fit. Manufacturing and IT have started to look at how they will structure routings and what they will need for related equipment such as bar code scanners and PC's.

"Chiaro Networks purchase the CELLS Workflow MES Product Tracking Manufacturing Execution System in 2001. We track every product in the plant with CELLS Workflow MES and we have a variety of items that can have a complex number of operations and outcomes at each step. CELLS Workflow MES forces the exact routing and tracks and collects the data we need. Also for customer returns we have the complete build history and we can add to that return unit the routing steps in the returns process. Support for CELLS Workflow MES has been very good."

Steve Kummel
Chiaro Networks


Customer comments, December 2005, about their ETL and UL certification:

"As we discussed, I was present during a recent product certification process conducted by ETL. This audit was conducted at the company where I had installed the Unisoft CELLS Workflow MES last year. We took the auditor through the paperless manufacturing flow we have developed using the CELLS Workflow MES Product Tracking Manufacturing Execution System software. With viewable Bills of Materials, assembly instructions, and product documentation we made a definite positive impression on the evaluator. We also demonstrated the fact that we could pick any serial number at random and provide up to the moment product status. Finally, we showed how it is impossible to move a part out of process flow while using the CELLS Workflow MES software to control the routing. During the debrief I was told by the auditors that this is one of the more sophisticated control systems and that this "small" company had far greater manufacturing controls than some of the "bigger" companies. We now have both UL and ETL certification with the help of the CELLS WORKFLOW Manufacturing Execution System.

"As the integrator of this platform at this customer, I appreciate your team at Unisoft making me 'look good' and will continue to promote your CELLS Workflow MES product whenever possible."

Michael
The Global Connection Company


"Unisoft CELLS Workflow MES is a great tool & a tremendous value. It performs like systems costing several times more & is easy to setup and maintain."

Ed Cook
EBS



A possible next step in your evaluation is an informal online demo. We can do the demo within minutes of you contacting us! We simply invite you via email to a webpage where you view our PC live, so there is no firewall or other security issues for you to deal with. To do the demo now or schedule one, call us (enable JavaScript for our phone number) or email us ().

Sample CELLS WORKFLOW Traveler Routings From Clients in Different Industries


INDUSTRY — TEXTILE / GARMENT:

$START pass go to PROCESS ORDER
PROCESS ORDER pass go to CUTTING or MRB
CUTTING pass go to SEW or MRB
SEW pass go to HOLDING TANK or MRB
HOLDING TANK pass go to SEWING IN APPLIQUE or MRB
SEWING IN APPLIQUE pass go to SEWING IN EMBROIDRY or MRB
SEWING IN EMBROIDRY pass go to PRINTING or MRB
PRINTING pass go to INSPECTION or MRB
INSPECTION pass go to SHIPPING or MRB
SHIPPING pass go to STOCK/SHIPPED or MRB
STOCK/SHIPPED if RMA go to PROCESS ORDER

INDUSTRY — FOODS & BEVERAGES — BOTTLING

$START Pass go to ENOUGH_SYRUP
ENOUGH_SYRUP Pass go to PRE_MIX or NEED_SYRUP go to BUY_SYRUP
BUY_SYRUP Pass go to PRE_MIX
PRE_MIX Pass go to FILL_BOTTLE or NOT_SWEET go to SWEETEN or TOO_SWEET go to $SCRAP
SWEETEN Pass go to FILL_BOTTLE
FILL_BOTTLE Pass go to PACKAGING or NOT_300ML go to FILL_300ML
FILL_300ML Pass go to PACKAGING
PACKAGING Pass go to $DONE
$DONE  
$SCRAP  

manufacturing execution system mes pcb inspection spc wip production floor control plm erp software product tracking

INDUSTRY — ELECTRONICS MANUFACTURING

$START pass go to INCOMING INSPECTION
INCOMING INSPECTION pass go to BOARD PREP or EF or MF or CNR
BOARD PREP pass go to SERIALIZE UNITS or EF or MF or CNR
SERIALIZE UNITS pass go to SMT PICK & PLACE TOP SIDE or EF or MF or CNR
SMT PICK & PLACE TOP SIDE pass go to THRU HOLE INSERTION TOP SIDE or EF or MF or CNR
THRU HOLE INSERTION TOP SIDE pass go to HAND ASSEMBLY PARTS or EF or MF or CNR
HAND ASSEMBLY PARTS pass go to WAVE SOLDER or EF or MF or CNR
WAVE SOLDER pass go to AUTOMATIC IN-CIRCUIT TEST or EF or MF or CNR
AUTOMATIC IN-CIRCUIT TEST pass go to CAPTURE TEST DATA or EF or MF or CNR
CAPTURE TEST DATA pass go to ATTACH SUB-ASSEMBLY
ATTACH SUB-ASSEMBLY pass go to FUNCTIONAL TEST
FUNCTIONAL TEST pass go to PACKING or EF or MF or CNR
PACKING pass go to $DONE
$DONE  

INDUSTRY — MACHINE SHOP / WELDING / FABRICATION

$START pass go to PLANNING
PLANNING pass go to STAGING or MRB
STAGING pass go to QC or MRB
QC pass go to OUTSIDE VENDOR or MRB
OUTSIDE VENDOR pass go to WELD or MRB
WELD pass go to MACHINE SHOP or MRB
MACHINE SHOP pass go to FABRICATION or MRB
FABRICATION pass go to ASSEMBLY or MRB
ASSEMBLY pass go to STOCKROOM or MRB
STOCKROOM pass go to $DONE or MRB
$DONE  

INDUSTRY — SEMI-CONDUCTORS

$START >
KITTING > BLANK > FRAME > PUNCH > STENCILS > VIA FILL > CONDUCTORS > INSPECTION > LAMINATION >
GREEN CUT > FIRE > FLATNESS > SAW > POST PRINT > TEST > POST PRINT2 > TEST2 > RESISTOR TRIM > IQA >
OVERCOAT PRINT > TEST3 > QCI > TEMP CYCLE > FQA > CREATE DATA PACKET > STOCK/SHIPPED >
$DONE

INDUSTRY — SOLAR PANELS

$START >
LOAD MODULES > APPLY SOLDERING FLUX > APPLY WIRE > HEAT WIRE > MODULES IN TRAY > ULTRASOUND CLEAN >
DRY > LOAD ASSEMBLY FIXTURE > FLUX MODULE GROUPS > SOLDER MODULE GROUPS > TEST GROUP VOLTAGE >
LOAD GROUPS PANEL > INSERT/SOLDER METALLIC STRIP > ADD GLASS LAYER > ADD LAMINATE LAYER >
APPLY SEALING FILM > PLACE IN VACUUM OVEN > TEST PANEL VOLTAGE >
$DONE

INDUSTRY — VEHICLE PAINTING

$START >
ACCEPTANCE > PRE-INSPECTION > WASH BAY IN > WASH BAY OUT > BLAST BOOTH IN > BLAST BOOTH OUT > PREP BAY IN >
PREP BAY OUT > PAINT BOOTH IN > PAINT BOOTH OUT > QUALITY INSPECTION > ACCEPTANCE INSPECTION > RELEASE >
$DONE

INDUSTRY — DOCUMENT MANAGEMENT

$START >
REGULAR PREP > SPECIAL PREP > LARGE FORMAT SCAN > INDEXING > STORAGE > BURN >
$DONE

INDUSTRY — CHEMICAL

$START >
PREP > MIX > QA > LABLE-BOTTLE > PACKAGING > SHIPPING >
$DONE

INDUSTRY — JET ENGINE BLADES, ETC.

$START >
ENCAP > ROUGH MILL > GRIND ROOT > GRIND REVIEW > DEBURR > DEBURR TRIPLANE > PART MARK > TIP CUT >
SLOT MILL > DEBURR/TIP POLISH > TUMBLE/STRESS > CMM - SLOT > VIS > JAK PART MARK > PENDING ETCH >
ETCH > FPI > SURFACE CHECK > AIRFOIL PEEN > ROOT PEEN (JAP) > VIS ROOT PEEN (JAP) > MEDIA (JAK) >
SURFACE CHECK 2 > CMM - FINAL > CMM - REVIEW > ROOT PEEN (JAP) 2 > VIS ROOT PEEN (JAP) 2 > PENDING COAT >
COAT/PLATE/ANTIGALL > RECEIVE > TUMBLE (JAP) > FINAL INSPECTION > SOURCE > SHIP >
$DONE

INDUSTRY — TOOL MANUFACTURING

$START >
TOOL_HUB-LAP > TOOL_LN-STAMP > TOOL_PLATING > TOOL_OD > TOOL_MEASURE > TOOL_PLATE-LAP >
TOOL_CUT BACK > TOOL_ETCH > TOOL_DRESSING > TOOL_EP > TOOL_SILICON-DRESS > TOOL_PN-STAMP >
TOOL_QA INSPECTION > TOOL_PACK > TOOL_SHIP >
$DONE

INDUSTRY — HOT TUB MANUFACTURING

$START >
ACCEPTANCE > PRE-INSPECTION > WASH BAY IN > WASH BAY OUT > BLAST BOOTH IN > BLAST BOOTH OUT > PREP BAY IN >
PREP BAY OUT > PAINT BOOTH IN > PAINT BOOTH OUT > QUALITY INSPECTION > ACCEPTANCE INSPECTION > RELEASE >
$DONE

INDUSTRY — METAL PLATING / FINISHING

$START >
PREP SETUP > 1ST INSPECTION > SURFACE TEST 1 > 1ST COAT > SURFACE TEST 2 > 2ND COAT >
SURFACE TEST 3 > 2ND INSPECTION > FINISH COAT > FINAL INSPECTION > PACK > SHIP > 
$DONE

INDUSTRY — METAL STAMPING & BENDING

$START >
PRIMARY CUT > ANNEALING > BENDING > TRIM CUT > THREADING > CHROME PLATING > PACKAGING > 
$DONE

INDUSTRY — MACHINE DISASSEMBLY

$START >
RECEIVING > INCOMING INSPECTION > TEARDOWN > INSPECTION > MACHINE > ASSEMBLY > FINAL QA > 
$DONE

CELLS WORKFLOW enables "Paperless" factory automation at every work cell in your plant. Production Floor Management, Plant Execution System, MES, Process Control, Product Traceability, order tracking, WIP Inventory Tracking, RFID tag enabled, Repair Loop, Workflow Management, SPC, Document Delivery, and Data Collection in one easy to use, integrated package. CELLS WORKFLOW is a cost effective solution providing the Plant Intelligence for making your job easier and saving your company money. Call us (enable JavaScript for our phone number) for details.


CELLS WORKFLOW — Gearing up the NEW Factory Floor™

CELLS WORKFLOW provides reports to quickly detail production status. For example the simple report below is available from the Report menu and displays a Work Order Summary with one line per work order. It is viewable by current unfinished WIP, date range, etc.

Double click on a work order line and a second drill-down report is displayed showing detailed status for each operation step in the work order. The drill-down report for work order WO000022 might look like this reporting 120 units yet to be finished and 80 completed:

manufacturing execution system mes software wip plm erp product tracking

CLICK HERE FOR ADDITIONAL REPORTS AND CHARTS

Woodworking / Cabinetry


Software trial: Click here for software download & more information!


"I still can't stop thinking about the extremely high number of practical applications this thing has in ALL assy manufacturing plants. So many companies are out there trying to become "World Class", and I keep thinking … 'if they only had this software'. I know it's not just my Process/Industrial Engineering background that makes me feel this way. From a control, continuous improvement, and Operations Management standpoint … the CELLS Workflow MES Product Tracking software is a hidden treasure."

John White
CEO

The Training Times

CELLS Workflow MES Product Tracking SOFTWARE

WHAT WE DO? — CELLS Workflow MES integrates and automates factory shop floors in just about any manufacturing environment. Our typical customer requires traceability, finding the status of orders, WIPtracking, process and quality control, a paperless working environment, and productivity improvement in diverse markets such as electronics, medical devices (FDA compliant), aerospace, contract manufacturing, pharmaceuticals, process industries, and general manufacturing.

WHAT PROBLEMS DO WE SOLVE? — From Six Sigma programs to FDA auditory requirements, today's manufacturers must track, and have traceability, of all phases of the manufacturing process. CELLS WORKFLOW is an easy to use solution for this challenge and it pays for itself.

CELLS WORKFLOW Main Benefits — We integrate shop floor processes at every work cell and critical data "Factory Intelligence" with ERP and management information systems.

HOW? … The CELLS Workflow MES enables "Paperless" factory automation with Process Control, Product Traceability, WIP Inventory Tracking, RFID tag enabled, tracking of orders, Workflow Management, Document Delivery, and Data Collection in one easy to use, integrated package.

CELLS WORKFLOW is a complete Manufacturing Execution System (MES) for shop floor process control. Real time Work-In-Process, PDM, PLM and Shop Floor Inventory tracking. The CELLS WORKFLOW Plant Execution System quickly attain better control, quality, faster time to market, improved utilization of manufacturing resources, reduced costs, define and enforce production procedures, capture comprehensive product and material history. Call us (enable JavaScript for our phone number) for details.


OTHER LINKS:


Software Solution: CELLS WORKFLOW

Below is a typical Unisoft CELLS Workflow MES solution for a shop floor control project for a mid-size general manufacturing plant:

Project: Application estimate — CELLS Workflow MES Product Tracking Software Shop Floor Control system

SUMMARY:

CELLS Workflow MES Product Tracking Software facilitates shop floor process/routing control, data collection, tracking orders, SPC, quality tracking, WIP/order/part tracking, Repair Loop, traceability, order status and document delivery. CELLS WORKFLOW is paperless manufacturing and gives you real-time visibility of the shop floor AND with its Windows based software is user-Friendly and easy to set up. CELLS WORKFLOW is also open ended for generating queries and reports (CELLS WORKFLOW REPORTS). CELLS WORKFLOW is RFID tag enabled for traceability throughout the product life cycle.

CELLS WORKFLOW BENEFITS:

Productivity Improvement: CELLS WORKFLOW can help you track and reduce defects, control your process workflow, maintain traceability, and operations data can be linked to track location, output, and trends. Operating machinery condition can also be tracked to schedule preventive maintenance.

Efficiency: Cycle times can be improved and idle time reduced with real-time information and analysis. Manufacturing capacity and efficiency can be increased through reductions in rework and scrap. On time deliveries should improve and the need to manually search for parts eliminated.

Costs: WIP can be managed and reduced. Rework trends, problem areas, and actual costs tracked. Accuracy and updating of BOM's and routings can be more effectively managed. Actual labor and material usage and cost performance can be measured and tracked.

CELLS WORKFLOW SYSTEM FUNCTIONALITY:

HARDWARE AND SYSTEM REQUIREMENTS:

Unisoft's CELLS Workflow MES operates with a relational database and freely exchanges data with EXCEL, ACCESS and other reporting software packages that are ODBC compliant. CELLS WORKFLOW is provided with System security and flexibility to adapt to security protocols.

Requirements for Unisoft CELLS WORKFLOW will vary depending on number of concurrent users and transactional activity. CELLS WORKFLOW uses any ODBC compliant database such as Microsoft Access, SQL, or Oracle. Windows 98, NT, Windows 2000, XP and on the client side minimum of Microsoft Windows 95.


More CELLS WORKFLOW Benefits & Features

With CELLS Workflow MES the main screen can display different types of documents depending on your industry. If you manufacture lawn mowers then possibly show an AutoCAD or Adobe PDF drawing with a break out of the gasoline engine sub-assembly with the current piece to be assembled highlighted. CELLS WORKFLOW can aid the assembly and tracking of any type of product in any industry and this allows CELLS WORKFLOW to be used throughout the different production areas in your company without having to utilize multiple tracking systems. Display Adobe PDF, HTML, MS WORD, CAD files, DXF, etc.

If you are an electronics manufacture then CELLS WORKFLOW includes all the rich display capabilities of our ProntoVIEW-MARKUP software. So in addition to the standard tracking and routing features of CELLS WORKFLOW the user can import and display virtually any CAD, ECAD, Gerber or BOM file. Then CELLS WORKFLOW displays your PC Board assemblies in rich detail and the user can find components, nets, shorts, part numbers, etc. Zooming, panning, rotating, flipping, schematic reconstruction — anything the user needs to find on the PC Board in a fraction of the time it would take with paper prints.

The CELLS Workflow MES is user-configurable and straight forward to install and maintain. CELLS WORKFLOW flexibility allows it to monitor production equipment and fill the critical gap between Enterprise Systems (ERP, MRP, etc.) and the factory floor.

BENEFITS:

CELLS Workflow MES FEATURES:

Workflow and Process Routings

WORKFLOW — CELLS WORKFLOW enables PAPERLESS Workflow from receiving, to production, assembly, testing, and shipping. With CELLS WORKFLOW — forced routing, customers have the ability to control and track shop floor transactions AND virtually eliminate assembly errors. Improved process control reduces cycle times and provides control where items go for their next step. CELLS WORKFLOW allows for modification of routes as well as capturing the actual route and rework operations. Routings can be validated to avoid missed operations. UniSOFT CELLS Workflow MES Product Tracking software answers these questions: Where does this unit go next? Is this the most current revision? What documents are associated with this unit? What do I do now? When will my work order be completed? How many times has this unit failed before?

WIP, Product Tracking, and Traceability

WIP/PRODUCT TRACKING — CELLS WORKFLOW tracking enables you to know where each part/assembly/serial/number/lot/work order is, where and WHEN it goes next, and how much work is waiting at each station. You'll be able to monitor, analyze, and reduce cycle times throughout the WIP process. Operation codes can be captured at each step to document work done to the part. With real-time visibility, management time can be better utilized on profit and productivity improvement.

 Production line

 

CELLS Workflow MES Product Tracking Software is built on Open Standards which means more choices for you. CELLS WORKFLOW adhere to Microsoft's Open Database Conductivity (ODBC) standard and therefore can exchange data with other executive systems such as ERP and MRP. Other CELLS WORKFLOW standards include Active-X Automation and Microsoft Internet Explorer. For example:

Full Featured CAD / Gerber viewer

find components cad viewer allegro viewer pcb viewer orcad viewer pads viewer schematic reconstruction pcad viewer protel viewer allegro odb viewer pc board viewer

When CELLS WORKFLOW is tracking product in the electronics industry it has the added feature of all the rich display capabilities of our ProntoVIEW-MARKUP program. CELLS WORKFLOW can import and display virtually any CAD, ECAD, Gerber or BOM file. Then CELLS WORKFLOW displays your PC Board assemblies in rich detail and users can find components, pins, nets, netnames, part numbers, etc. Find shorts between traces (highlight single or multiple traces). Display markup overlays that go on top of the PC Board assembly to create work and assembly instructions. Zoom, pan, rotate, flipping, split-screen display, active schematic view that is hyper-linked to the assembly — find what you are looking for in a fraction of the time it would take with paper prints.

Online Documentation

CELLS Workflow MES Product Tracking Software brings your users just the documents they need for the assembly and step they are working on right now. When the user scans or types in the ID of the unit he/she is working on, CELLS WORKFLOW automatically locates the assembly drawing, plus all documents related to the assembly and its parts. CELLS WORKFLOW automatically brings the main document(s) you wish direct to the display screen, other documents needed in that process step are sent to the CELLS WORKFLOW View menu where they can be displayed as needed. Also documents can be hyperlinked to items and areas on the main display then clicked on to display that document. Virtually any type of document can be viewed — Adobe PDF, HTML, MS WORD, CAD files, DXF, etc.

Also CELLS WORKFLOW can display any Internet or Intranet web site at any assembly step. For example the user can view internal HTML documents such as existing inspection procedures that reside on your company's intranet or display a part vendors specification sheet directly from the vendors web site or research data, etc. Use any of the literally hundreds of free or inexpensive tools with which to build your HTML documents (Microsoft Office(WORD, FrontPage, etc. or nearly any word processor).

Data Collection and Reporting

Users scan or key in unit serial numbers in order to get the graphical display of the assembly. In so doing, unit serial number are automatically tracked as they move from station to station. Your technicians are probably writing on defect tags right now. With CELLS Workflow MES Product Tracking Software, a convenient online form is just one keystroke away, already filled out with most of the required data. In most cases, the tech only needs to pick an exact defect code from a list of suggested codes for the current operation.

Once your work-in-progress, failure/quality or other data is in the CELLS Workflow MES Product Tracking Software database, you can report against it with the existing reports available on the CELLS WORKFLOW Report menu. Or you can create reports with any report writer or analysis tool that supports ODBC (Crystal Reports, Access, SAS, Excel, etc.) (CELLS WORKFLOW REPORTS). You can even publish the reports to your CELLS WORKFLOW intranet or provide dynamic report generation through CELLS WORKFLOW or any web browser. For example over the internet your clients, vendors, QA or sales personnel can use their web browser to review current product tracking Order Status, Production Step Cycle Times, run reports on Quality Defects and Trends. No need to gather status and quality data when your key clients request it, it's always available when they need it via secured password protection.

You tell CELLS Workflow MES what to do. Menus are generated automatically based on the documents you want to display. Your color preferences. Your assembly IDs. Your serial number schemes. Your station IDs. Your Operation Codes. Your Defect Codes. Even which defect codes apply to which operations. Which fields get logged for which defect codes.

CELLS WORKFLOW offers even more customization through Active-X automation (for example gather data directly from production equipment into CELLS WORKFLOW).

Open Standards Mean More Choices for You

Contact our webmaster (enable JavaScript for the email address) with questions or comments about this web site.

Web Consulting by Dorene Matney
© 2024, Unisoft